Blinking LEDs
Basic example to turn LEDs on/off in a row.
/* blinking leds
*
* turn on/off three leds in a row
*
* Sensor-Aktor Workshop
* Lab3 2008
* Kunsthochschule fuer Medien Koeln
* Academy of Media Arts Cologne
* http://interface.khm.de
* SensorAktor Workshop
* Lab3 2008
* Kunsthochschule fuer Medien Koeln
* Academy of Media Arts Cologne
* http://interface.khm.de
* pin mapping SensorAktor Shield
* import SensorAktor.h to get already defined mapping
*
* analog inputs: analog0 = pin0, analog1 = pin1, analog2 = pin2,
* analog3 = pin3, analog4 = pin4, analog5 = pin5
* built-in poti: poti = pin5
* amplified input: mic = pin0
* switches: switch1 = pin1, switch2 = pin2, switch3 = pin3
* leds: led1 = pin3, led2 = pin5, led3 = pin6
* power outs: out1 = pin3, out2 = pin5, out3 = pin6
* motor outs: motor1_1 = pin8, motor1_2 = pin13, motor2_1 = pin11, motor2_2 = pin12
* motor pwms: pwmMotor1 = pin10, pwmMotor2 = pin9
* servo outs: servo1 = pin2, servo2 = pin4, servo3 = pin7
*/
// import sensor aktor library for pin mapping
#include <SensorAktor.h>
// delay time
int delayTime = 50;
// this block is executed one time when programm starts
void setup(){
// set pin modes
pinMode(led1,OUTPUT);
pinMode(led2,OUTPUT);
pinMode(led3,OUTPUT);
}
// this block is executed in a loop after setup is called one time
void loop(){
// sets LED1 on
digitalWrite(led1,HIGH);
// wait (ms)
delay(delayTime);
// sets LED1 off
digitalWrite(led1,LOW);
// wait (ms)
delay(delayTime);
// sets LED2 on
digitalWrite(led2,HIGH);
// wait (ms)
delay(delayTime);
// sets LED2 off
digitalWrite(led2,LOW);
// wait (ms)
delay(delayTime);
// sets LED3 on
digitalWrite(led3,HIGH);
// wait (ms)
delay(delayTime);
// sets LED3 off
digitalWrite(led3,LOW);
// wait (ms)
delay(delayTime);
}
Set speed on/off rhythm with variable “delayTime”.
// delay time int delayTime = 50;
Files needed
Since Arduino 0015 there are some problems with the old “SensorAktor.h” file.
Use this one instead.